PC · Material and appearance reference
PC FILAMENT
PC
Technical covers and guards for demanding prototypes.
- Technical covers
- Machine guards
- Functional prototypes
Product options & documents
- Grade
- PC
- Diameter
- 1.75 mm ± 0.05 mm
- Net spool weight
- 1 kg
- Spool format
- High-temperature reusable spool
- Nozzle temperature
- 250–270 °C
- Bed temperature
- 90–105 °C
- Drying
- 75 °C for 6 h
- Print speed
- Up to 200 mm/s
Product documents
Your current selection is included with each document request.
Take the protective shape into a part trial
PC is a material route for housings, guards and demanding functional prototypes. Printed mounting points and protective shapes make the application concrete.
- Technical covers
- Machine guards
- Functional prototypes
Check the guard, fastening and service conditions
Print a representative guard or cover with its mounting features. Review drying and equipment guidance, then define the impact and service-condition checks relevant to that specific part.
- High-temperature printer review
- Drying guidance required
- Part-specific qualification
Evaluate the selected grade on your part and printer. Application images do not establish measured performance.
Compare the material choice
ABS is a separate housing and finishing route to compare. Keep the PC grade’s equipment and application checks attached to its own sample.
Review ABS →Compare another material.
Full material catalog →
Build your material mix.
Use the selection above for a NOVTAU wholesale request or your own branded range.