NOVTAU
Inquiry ListRequest a Quote
PLA-CF: filament on a solid black spool with a textured reinforced-plastic mounting fixture

PLA-CF · Material and appearance reference

PLA FILAMENT

PLA-CF

Carbon-fiber-reinforced PLA for rigid prototypes and low-gloss technical models.

  • Rigid prototypes
  • Fixtures
  • Technical housings
Choose color & quantity ↓

Product options & documents

CURRENT PROCUREMENT STATE

Configure your PLA-CF request

Current grade: PLA-CF. Set the color reference, quantity, cooperation type, packaging, sample interest and document requests in this form.

Color reference (optional)Not selected
Color reference: Not selected
Choose a reference for your request

Reference colors and effects are for selection, not a stock list.

Choose a NOVTAU buying route for your material, quantity, packaging and label plan.

Configuration & packaging (optional)

Options to discuss: Color and effect; Diameter and net spool weight; Spool and label configuration; Carton and document set.

Evaluation requests
Document scope
Additional reference codes

Quantity: To discuss

We will confirm sample options and arrangements for your request.

Grade
PLA-CF
Diameter
1.75 mm
Net spool weight
1 kg
Spool format
High-temperature reusable spool
Nozzle temperature
190–230 °C
Bed temperature
25–60 °C
Drying
55 °C for 6 h
Print speed
Up to 200 mm/s

Product documents

Your current selection is included with each document request.

PLA-CF: a ribbed instrument bracket
Printed application example

A technical surface for prototype work

PLA-CF combines a technical surface with a stiffness-focused material direction. Fixtures, mounting concepts and housings are useful starting points for evaluating a reinforced PLA range.

  • Rigid prototypes
  • Fixtures
  • Technical housings
  • Low-gloss models

Measure the fixture as well as its finish

Check the specified nozzle and handling setup, then print the intended mounting face or fixture section. Measure the mating features and observe the part under the buyer-defined load direction.

  • Carbon-fiber reinforcement
  • Low-gloss technical surface
  • Hardware review required

Evaluate the selected grade on your part and printer. Application images do not establish measured performance.

Compare the material choice

Compare Tough+ for handled and assembled PLA prototypes. PLA-CF adds a reinforced material direction where rigidity and a low-gloss technical surface are the questions to test.

Review PLA Tough+ →

Compare another material.

Full material catalog →
PLA Tough+: filament on a solid black spool with a two-part tool enclosure prototype

PLA Tough+ →

A tougher PLA option for handled prototypes, fixtures, housings, and recurring functional parts.

PLA Basic product scene with cobalt blue filament spool, ivory architectural model, terracotta vase, sage perforated sphere and NOVTAU kraft box

PLA Basic →

General-purpose PLA for prototypes, classroom models, and display parts.

PLA Matte: filament on a solid black spool with a rounded ribbed desk organizer and small matching tray

PLA Matte →

Low-gloss PLA for presentation models, homeware, and parts where reflected light should be reduced.

Build your material mix.

Use the selection above for a NOVTAU wholesale request or your own branded range.

Continue with this material →About wholesale →About private label →
PLA-CF Filament | NOVTAU Wholesale & Private Label