Gallery images are product-family visual references. The form color is an independent planning input and does not switch the gallery.
FAM-PLA-SILK-PLUS
PLA Silk+ Filament
Use PLA Silk+ Filament as a material-family shortlist for decorative models. Compare the selected grade against the target printer and representative part.
Key Features:
- High-sheen effect
- Decorative finish
- Desktop FDM review
Planning references only; not an offer. Confirm grade, color or effect, diameter, spool, packaging, documents, sample path, MOQ, and timing in writing.
PLA Silk+ can be configured around a reviewed project brief
Approve PLA Silk+ on curved and faceted sample parts because highlight, color, geometry, and layer direction affect the visible result. Mechanical suitability remains part-specific.
Use the PLA Silk+ website record as a planning reference for decorative models. Compare the selected grade on the intended printer and a representative part before defining acceptance checks.
Not an offer: confirm grade, color or effect, diameter, spool, packaging, document scope, MOQ, and timing in writing.
Options to confirm
Printed Part
References
PART-01Wide low sculptural bowl whose rim forms five asymmetric swept petals, with a stable integrated foot and open top; not a tall vase and not a helix
PART-02Low-poly lion bust on an integrated round plinth
PART-03complete articulated eastern dragon curled into a compact circular pose, every limb and the entire tail visibly connected to the body
PART-04Fluted planter with three small integrated feet
PART-05Faceted sitting rabbit sculpture with both ears fully visible
PART-06Scalloped lattice lampshade with a circular base ring and open top
PART-07Asymmetric trophy sculpture made from two sweeping crescent arcs surrounding one faceted gem form on an integrated hexagonal pedestal
PART-08Ornamental masquerade-style wall mask, unlettered and
PART-09Double-helix kinetic-looking decorative sculpture on a wide base
PART-10Open-lattice fruit bowl with an undulating rim
PART-11Logarithmic shell sculpture on a small integrated stand
PART-12Ornamental chess knight with a decorative mane on a round chess baseMaterial Review
Samples
MAT-01Stepped color-and-sheen sample tower with ten clean unnumbered faces
MAT-02Curved-wall ribbon coupon showing continuous horizontal FDM layer lines
MAT-03Stepped overhang fan coupon with five unsupported angles and a wide base
MAT-04Thin-wall cylinder set of three nested open cylinders on one base
MAT-05Faceted dodecahedron surface coupon on a low integrated foot
MAT-06Ribbed rectangular surface panel held upright by an integrated stand
MAT-07Spiral-vase wall coupon with a wide foot and open top
MAT-08Diamond-lattice cube material coupon with every outer edge intact
MAT-09Flat top-surface tile containing smooth concentric FDM paths
MAT-10Bridge-test coupon with two pillars and one clean suspended span
MAT-11Seam-position cylinder coupon with a deliberate vertical layer seam
MAT-12Unlettered geometric relief medallion with abstract concentric facets
MAT-13Two complete matching curved sample coupons side by side for repeat appearance review3D Print
Paths
FDM-01Rectangular FDM path demonstration plate showing perimeter, three walls and diagonal infill, with one small complete unbranded nozzle-and-heater-block assembly hovering above and fully inside frame with generous top margin
FDM-02Fine-layer miniature turbine housing with concentric contours, with an unbranded nozzle hovering above
FDM-03Spiral-vase path sample with one continuous helical wall, with one small complete unbranded nozzle-and-heater-block assembly hovering above and fully inside frame with generous top marginMarket Color
References
Surface
Review
SRF-01Smooth curved vase coupon emphasizing broad flowing specular highlights
SRF-02Deeply ribbed cylinder coupon emphasizing alternating highlights and shadows
SRF-03Faceted polyhedron coupon emphasizing crisp planar highlight changes
SRF-04Staircase coupon printed in three visible layer directions on an integrated base
SRF-05Flat rounded-square top-surface coupon with concentric monotonic FDM paths
SRF-06Tapered hexagonal vessel coupon with a deliberately controlled vertical seam facing the camera and an angled open top; not a plain cylinder
SRF-07Support-contact bridge coupon displaying a clean underside and both pillars
SRF-08Sphere-and-cradle sheen coupon emphasizing highlight and shadow response
SRF-09Spiral-wall vessel coupon displaying a continuous helical surfaceQualification
Review
QLF-01Dimensional fit fixture with three nesting silk-PLA plugs and sockets, accompanied by an unbranded caliper with
QLF-02Four complete matching curved color coupons in a neutral physical comparison tray
QLF-03Two-piece dovetail assembly-fit sample shown neatly joined with one matching loose half beside it
QLF-04Overhang review tower with a sequence of increasing angles and a wide stable base
QLF-05Bridge inspection frame with several clear suspended spans
QLF-06Thin-wall gauge set of four open cylinders with visibly different wall thicknesses
QLF-07Three complete matching curved retained sample coupons arranged in a clean laboratory tray for repeat reviewSupply & Document
Review
DOC-01Unbranded Silk PLA spool beside a completely blank white circular label proof and gold curved sample coupon
DOC-02A plain unmarked document folder opened to completely blank white sheets beside silver material coupon and a short filament loop
DOC-03A clear sealed sample pouch containing purple curved Silk PLA coupon
DOC-04Unbranded red Silk PLA spool beside a plain moisture-control sachet and red spiral test coupon, all surfaces blank
DOC-05Unbranded black Silk PLA spool partly inside a plain silver moisture-barrier bag with
DOC-06Unbranded gunmetal Silk PLA spool beside a completely blank removable spool-label ring and matching sample token
DOC-07Three complete brass Silk PLA retained sample coupons arranged in a reusable rigid laboratory tray with blank divider cards
DOC-08Unbranded blue Silk PLA spool protected by two plain reusable molded transit shells, shown open so the spool is fully visible