Products/PA6-CF

PA6-CF filament on a black spool with right-angle bracket and flange

PA6-CF · Material and appearance reference

PA / PET FILAMENT

PA6-CF

Reinforced nylon for brackets, mechanisms and production aids.

Production aids
Technical brackets
Mechanism prototypes

Product options & documents

CURRENT PROCUREMENT STATE

Configure your PA6-CF request

Current grade: PA6-CF. Set the color reference, quantity, cooperation type, packaging, sample interest and document requests in this form.

Color reference (optional)Not selected

Color reference: Not selected

Choose a reference for your request

Reference colors and effects are for selection, not a stock list.

Quantity unitQuantity

Buying forBuying route (optional)

Choose a NOVTAU buying route for your material, quantity, packaging and label plan.

Configuration & packaging (optional)

Options to discuss: Color and effect; Diameter and net spool weight; Spool and label configuration; Carton and document set.

Diameter requestSpool weight requestPrinter pathConfiguration color

Evaluation requestsColor matchFDM print sampleSpool labelPack review

Document scopeTDS / SDSCompliance docsTechnical review

Additional reference codesCompact cycloidal gearbox housing with concentric bolt bosses and an integrated footArticulated robot wrist bracket with ribbed webs and circular bearing seatsEnclosed bevel-gear transfer case with a removable inspection cover placed beside itIndustrial camera housing with a deep lens hood, rear cable strain relief, and mounting earsDrone motor arm assembly with a broad motor pad, lattice reinforcement, and frame clampTwo-piece pump guard housing with curved ventilation ribs and matching fastener bossesMachine-vision sensor bracket with a slotted base, gussets, and protective hoodCompact gripper jaw fixture with paired mirrored jaws seated in a dark metal setup platePlanetary gear carrier and three meshing gears arranged as one coherent mechanismCable-chain end bracket and guide channel assembled on a small industrial railBearing pillow-block prototype with a round bore, split cap, and four mounting feetRugged electronics enclosure with recessed lid, corner bosses, and sealed-looking cable portsRobotic end-effector adapter plate with radial ribs, central hub, and aligned mounting patternA fully enclosed FDM printer making dark PA6-CF technical bracket, seen through the closed clear doorA fully enclosed FDM printer making dark PA6-CF gearbox housing, viewed from a low three-quarter angleA fully enclosed FDM printer finishing dark PA6-CF machine fixture, with the chamber door closedGraphite-black PA6-CF gear beside a neutral grey reference card withMatte-black PA6-CF sensor housing under a soft cross-polarized inspection light, prepared for surface reviewTwo complete dark PA6-CF bracket samples under neutral daylight and warm booth light for appearance comparisonCharcoal PA6-CF fixture rotating on an unmarked studio turntable for consistent visual inspectionDark PA6-CF enclosure with a removable lid, both fully visible under a diffuse inspection domeThree complete black PA6-CF gears on an unmarked black-to-grey stepped sample stand for batch appearance reviewDark PA6-CF machine bracket being gently hand-deburred at one accessible edge with a fine ceramic toolGraphite PA6-CF gear housing being cleaned with a soft anti-static brush on a professional work matBlack PA6-CF fixture in a compact controlled media-finishing cabinet, fully visible through the windowCharcoal PA6-CF sensor housing under raking light for layer and edge-finish inspectionDark PA6-CF bearing mount held in a padded inspection vise while a technician checks its boresA single complete black PA6-CF robotic mounting bracket after clean support removal with one intact pair of metal flush cutters beside itGraphite PA6-CF enclosure being wiped with a lint-free cloth at a clean industrial benchDark PA6-CF gear set arranged on a precision surface plate for visual mating and finish reviewCharcoal PA6-CF cable guide photographed before and after careful edge cleanup as two intact examplesBlack PA6-CF spool inside a clean filament dryer with an intact technical bracket placed beside itA sealed unbranded moisture-barrier filament pouch and dark PA6-CF gear housing on a clean review benchGraphite PA6-CF fixture and matching coupon stored in a compartmented sample trayBlack PA6-CF enclosure seated in a simple dimensional qualification jigDark PA6-CF gear assembly in a functional fit-check fixture with all parts intact and visibleCharcoal PA6-CF bracket beside a blank traveler sheet and unmarked inspection tokens in a supply-review sceneBlack PA6-CF sensor mount in a foam-lined reusable sample case with every cavity visibleThree complete dark PA6-CF parts organized in a reusable supplier sample tray with blank divider tabsBlack PA6-CF gearbox housing beside an unbranded filament spool and a blank material-review folderGraphite PA6-CF robotic bracket in a reusable transit tote with soft dividersCharcoal PA6-CF enclosure with an unmarked sealed sample pouch and blank receiving checklistBlack PA6-CF gear set in a numbered-position style rack with blank reference positionsDark PA6-CF fixture at a supplier handoff bench with plain reusable binsGraphite PA6-CF housing beside an unbranded reusable spool and a moisture-control canisterBlack PA6-CF end-effector mount in a clean sample-return case with a blank approval card

Packaging requirements

Quantity: To discuss

We will confirm sample options and arrangements for your request.

Grade: PA6-CF
Diameter: 1.75 mm ± 0.05 mm
Net spool weight: 1 kg
Spool format: High-temperature reusable spool
Nozzle temperature: 280–300 °C
Bed temperature: 40–50 °C
Drying: 100 °C for 10 h
Print speed: Up to 100 mm/s

Product documents

Your current selection is included with each document request.

PA6-CF: a mounting fixture with a circular opening and two base attachment holes — Printed application example

Build the nylon trial around a working mechanism

PA6-CF is a nylon-based option for brackets, mechanisms and rigid tooling. Its technical surface and printed geometry belong in a separately qualified engineering range.

Production aids
Technical brackets
Mechanism prototypes

Check movement, fit and the planned load

Keep moisture handling and printer capability with the sample record. Use the actual bracket or mechanism geometry to assess fit, load direction and any wear or repeated-motion requirements.

Carbon-fiber reinforcement
Moisture-control review
Engineering part qualification

Evaluate the selected grade on your part and printer. Application images do not establish measured performance.

Compare the material choice

Both are PA6-based reinforced options. Compare carbon-fiber and glass-fiber grades on the same part for dimensions, surface and the mechanical behavior your project requires.

Review PA6-GF →

Compare another material.

Full material catalog →

PET-CF filament on a black spool with slotted fixtures

Build your material mix.

Use the selection above for a NOVTAU wholesale request or your own branded range.

Continue with this material →About wholesale →About private label →