NOVTAU
Inquiry ListRequest a Quote
PET-CF filament on a black spool with slotted fixtures

PET-CF · Material and appearance reference

PA / PET FILAMENT

PET-CF

PET-based composite for dimension-focused jigs and frames.

  • Alignment jigs
  • Technical frames
  • Positioning components
Choose color & quantity ↓

Product options & documents

CURRENT PROCUREMENT STATE

Configure your PET-CF request

Current grade: PET-CF. Set the color reference, quantity, cooperation type, packaging, sample interest and document requests in this form.

Color reference (optional)Not selected
Color reference: Not selected
Choose a reference for your request

Reference colors and effects are for selection, not a stock list.

Choose a NOVTAU buying route for your material, quantity, packaging and label plan.

Configuration & packaging (optional)

Options to discuss: Color and effect; Diameter and net spool weight; Spool and label configuration; Carton and document set.

Evaluation requests
Document scope

Quantity: To discuss

We will confirm sample options and arrangements for your request.

Grade
PET-CF
Diameter
1.75 mm ± 0.05 mm
Net spool weight
1 kg
Spool format
High-temperature reusable spool
Nozzle temperature
270–300 °C
Bed temperature
70–80 °C
Drying
100 °C for 10 h
Print speed
Up to 100 mm/s

Product documents

Your current selection is included with each document request.

Black printed PET-CF fixture showing open slots and fine layer texture
Printed slotted fixture close view

Keep PET and PETG separate in the fixture shortlist

PET-CF uses PET, rather than PETG, as the polymer base. Positioning jigs, frames and technical components give buyers concrete uses to evaluate.

  • Alignment jigs
  • Technical frames
  • Positioning components

Measure the locating features

Use the alignment holes, mating faces and frame dimensions from the intended fixture. Record the exact PET-CF grade, drying and printer setup with the measured sample so repeat trials use the same reference.

  • Carbon-fiber reinforcement
  • Dimension-focused review
  • Drying guidance required

Evaluate the selected grade on your part and printer. Application images do not establish measured performance.

Compare the material choice

PETG-CF is a different polymer-base option. Compare its grade documentation and printed fixture result rather than carrying over the PET-CF process or dimensions.

Review PETG-CF →

Compare another material.

Full material catalog →
PAHT-CF filament on a black spool with shaft mount and slotted tray

PAHT-CF →

Carbon-fiber-reinforced high-temperature PA for tooling, fixtures, and structural technical parts.

PA6-CF filament on a black spool with right-angle bracket and flange

PA6-CF →

Carbon-fiber-reinforced PA6 for rigid tooling, brackets, mechanisms, and production aids.

PA6-GF filament on a black spool with blue enclosure and lid

PA6-GF →

Glass-fiber-reinforced PA6 for tooling, fixtures, housings, and load-bearing part qualification.

Build your material mix.

Use the selection above for a NOVTAU wholesale request or your own branded range.

Continue with this material →About wholesale →About private label →